供应ECON-10SS锡渣还原机
一、 基本能与特点 Features: 1、 本机采用特殊搅拌分离机构,锡渣自动输入进入搅拌区焊锡内部; Uses special mixing & seperation design, the dross automatically feeded into inner part of mixing part. 2、 锡灰自动分离出来,并排出至锡灰收集箱内; Automatic separation of tin and tin ash,into the tin and tin-ash collection device. 3、 分离后的焊锡自动进入焊锡贮存箱内,达到一定液位后自动,人工打开放锡咀,排放至接锡盘内成形; Separated liquid pure tin automatically stored in the tin cabin, when it is reaches a certain volum, the alarm system turns on, operator just only need discharge the liquid pure tin into molding tray. 4、 本分离装置无需人工清理高温滤桶内的锡灰,解决了高温危险性; This machine is no need to clean high temperature filtering cabin to oid any human damange. 5、 分离率非常稳定,分离后的锡灰呈面粉状,目视基本无明显锡粒; Stability of high separation rate, powder type ash afterater separation hardly see any solder by visual. 6、 完全符合节能、安全、环保要求; Suit for energy safty and Econ-friendly requirement. 7、 日处理量:100KG-120KG/8H; Ability: 100KG-120KG/8H 8、 隔热防护网,避免操作员烫伤,机壳表面温度控制在45度以内. Heat insulation prevention mesh controls the machine outside temperature within 45℃, which is oid operator to be hurt. 二、 整机部分 Body: 1、 外壳全部采用不锈钢材料,美观大方,维护方便; All-stainless steel tank,clean convenience. 2、 电源Power:220V; 3、 启动Totol power consumption:3.6KW; 4、 正常Normal running power:≤1.5KW; 5、 净重Net weight:约110KG; 6、 外型尺寸Dimension:660mm(L)X480mm(W)X1000mm(H) 三、 电控部份 Electronic Part: 1、 按键式面板操作控制; Keyboard panel control 2、 OMRON数显温度表显示温度,温度调节方便直观,控温准确; OmRON temperature meter vertically display temperature adjustment with accurate temperature. 3、 控温采用PID+SSR模式; Uses PID+SSR for temperature control 4、 漏电保护装置; Uses creepage protection device. 四、 搅拌分离系统 Mixing & Separation System: 1、 入口料斗:锡渣容量≤10KG; Feeding gate: ≤10KG dross 2、 炉胆采用特殊不锈钢316L材料制做;耐腐蚀;耐高温;内部底锡容量 70Kg (max) ,熔解时间:约60分钟; 316L stainess steel oven can bear high temperature and rust. Max. 70kg “bottom tin” stored in empty oven, needs 60mins to be melt when uses the machine 3、 加热系统采用U型发热管,外罩铸铁发热板;防变形; Uses “U” shape heater covered cast iron heating plate, which is oid deformation. 4、 独特的搅拌分离系统组件,专利设计; Patent mixing and separation system. 5、 分离速度:15KG /60分钟 Separation Speed: 15KG /60mins 6、 搅拌电机:成帮高温电机 90W 220V; Mixing Motor: 90W 220V Taiwan made motor 7、 锡条/锡灰分离出来的焊锡自动进入独立收集箱内贮存,达到一定液位后,人工排出,锡条成形模配送2套,方便更换; 锡灰自动排出至锡灰收集箱内,1套配送,方便更换 Tin Bar/ash: Separated pure tin goes into a cabin, when it reaches a certain volum, the alarm system turns on to inform discharge. Equipped with 1 sets molding tray. Ash goes into collection box, equipped with 2 boexes. 五、 烟雾过滤 Filtering System: 1、 外接排风口径:4寸 Outer exhausting gate: 4". 愿与新老客户建立良好合作关系